6
Operation (continued)
1
Powering the Log Set Heater to
□
Press this button into the “I” position for main power to the
unit.
2
Flame Button
□
settings at High, Medium and Low.
□
the highest setting.
□
Each time the Flame button is pressed, the brightness
completely is to turn off the Power switch.
3
Heater Button
□
Press the Heater button to turn on or turn off the heater.
□
Each time the heater is turned on, it should stay on for at
least one minute.
□
When the ambient temperature is higher than the set
temperature, heat will turn off automatically.
4
Adjustable Thermal Control Button
□
To adjust the temperature to your individual requirements,
turn the thermostat dial to the right (clockwise) to increase
the temperature and to the left to decrease the temperature.
□
This thermostat control dial can only be used while the
power switch is in “I” position and the heater needs to be
turned on.
□
When the heater reaches the desired temperature, the
heat will turn off. When the temperature drops below the
selected temperature, heat will restart again.
Power Button