25
FEEDING NOTES
When set properly, the feed is very efficient and flexible. When neglected it can become
very frustrating to run even the simplest job. The adjustments previously discussed are
very important.
The KF-250 is capable of running 120 -350 gsm stocks. It is also very capable of handling
gloss, coated, and even laminated stocks. Its flexibility is directly related to the
operator’s experience.
To clean the vacuum rubber friction bands , use only water on a clean cloth. Wipe the
rubber use the jog button to rotate the vacuum wheel then wipe again. Repeat until
both are wiped down completely.
As you increase the amount of stock you may need to increase the pressure flow from
the pump. Also when the stock mount decreases you may need to decrease the amount
of pressure flow.
The lighter the stock, the lighter the ball combo needs to be.
DELIVERY TABLE
The delivery table for the KF-250 is a motorized delivery that has a variable speed knob that is
used to adjust the speed. It also has a smart sensor that ensures the paper only travels a short
distance to ensure continued shingling. The speed of the conveyor is directly related to how
tight the shingle of the sheets is. If the feed table is set too slow it will cause the paper to build
up and could cause a paper jam.
