23
ADJUSTING THE FEED RAIL
The fixed feed rail on your KF-250 is factory set and should not be adjusted. If necessary, it is
possible to have slight adjustment to the rail by using the button head screws on the bottom of
the feed rail. By making this adjustment the machine may no longer function as desired. Please
use caution and speak to a trained Count service technician before making any adjustments to
the fixed feed rail. If done improperly this may void your warranty on the machine.
LOADING THE FEEDER
Take one sheet of the stock you are going to run. Place it against the fixed feed rail and the
caliper disk.
Loosen the lock knob on the back stop assembly and move it to the end of the sheet. DO NOT
PINCH THE SHEET! This is to prevent the sheets from moving backward not to push the sheets
forward. Loosen the front and rear lock knob on the operator side feed rail and adjust it up to
the side of the paper. DO NOT PINCH THE SHEET! This is supposed to be aligned to the side of
the sheet but not to pinch. Proper alignment of the rail is imperative to getting consistent
feeding of stock.
