10
EN
GL
IS
H
Mitre Cutting –45/ 0° / +60°
This saw is capable of making mitre cuts at angles of - 45° / 0° / + 60°.
1. Raise the saw head (4) to its upper position by releasing the lock (17).
2. Undo the locking knob (10) and set the saw to the desired mitre angle using the scale (13).
3. Tighten the locking knob (10) and cut as previously described.
Sawing bowed workpieces
When sawing flat workpieces, check if the workpiece is bowed. Turn it as shown in the figure to prevent it
from pinching the blade after cutting.
Correct
Incorrect
Dust bag
The saw is fitted with a dust bag (24) which can be emptied by opening the zip on the bottom.
A dust extractor can also be attached to the outlet.
10
10
10
24
10
13
