Put the main body on the carpet or cushion as shown in the picture
after taking out from packing carton.
As shown in step l, open the folding handle in the direction as
shown in the picture. Meanwhile the lower end of the riser will
expand to the two sides naturally. Raise the riser upward to the
upper limit position as shown in step2. Press ''folding handle" and
lock riser as shown in step3.
Fix "phone bracket” with two pieces ST4.2*22 bolts on riser beam
as shown in the step4 of right picture. Cut out 4 pieces "square
rubber plugs" as shown in the step5. Insert left and right handlebar
into the corresponding positions and lock them into the
corresponding screw holes of the handlebar through the riser with
two pieces M8*45 bolts. Put 2 pieces "square rubber plugs" back
into the previous square hole. And keep the remaining two pieces
by yourself as shown in step 7.
Put the "safety lock" into the corresponding position under the beam
of the riser as shown in step 8. Insert the power cord into the
socket of the power switch and install it.
Note: Please check again whether all bolts are locked after the
assembly of the machine.
5.Installation procedure
18
