Costway SP37497 User Manual Download Page 10

www.costway.com

 Apply three coats of adhesive to the patch and the kayak. Wait 5 

minutes in between each coat.

 Place the patch over the tear/rip. The adhesive will react quickly, so 

make sure the positioning is precise/accurate. Use the roller to ensure 
the patch lays flat and even.

 Wait 24 hours before re-inflating the kayak.

INSTRUCTION FOR CARE AND STORAGE

Having an inflatable kayak makes portability and storage very easy. 
Here are some simple suggestions if you plan on traveling with your 
kayak.

 Before storing, hose off the kayak and let it dry completely to pre- 

vent mildew buildup.

 Do not use harsh chemicals for cleaning. Most dirt can be removed 

with a mild soap and fresh water.

 You may store the kayak inflated or deflated. If you deflate the 

kayak, we recommend that you store it in the protective bag that came 
with the kayak.

 If storing the kayak outdoors, raise it up off the ground and cover it 

with a tarp to prevent exposure to the sun.

 Hanging the kayak is not recommended.

 Do not store in extreme conditions (o.e. above 66

/150

 or below 

-23

/-10

).

 Store in a clean and dry place.

 Do not roll up the kayak too tight when storing it while deflated.

 If fins become bent, place them in boiling water and use heat (e.g. 

hairdryer) to bend them back into position.

10

Summary of Contents for SP37497














Reviews: