Then connect the body as a round
platform.
Before assembling the screw bolt,
firstly put it through the Velcro
belt.
Screw bolt goes through the Velcro
belt cover.
Assemble the screw bolt to the
frame tube.
7
8
9
10
Tighten it with screw nut, do not
forget the washer.
11
Use wrench to tighten it before
use.
12
After the bolt assembling, cover
the Velcro belt, and repeat 3 times
on other 3 bolts.
13
14
The appearance from the top is
shown in the figure.
04
05
3
4
5
6
Put the 4 metal tubes with foam
into the sleeves one by one.
Put the tube like this.
Repeat it, and make it like half
folded as shown.
Put the 2 tube into the sleeve,
small socket to the big socket and
connect it.
nd
