Once the appliance has been plugged into a grounded electrical outlet, it is ready to operate.
4.1 MAIN POWER BUTTON
The Main Power Button is located on the upper right (left) of the fireplace as illustrated. Press indicator to turn on
the appliance, press the other side turns it off.
HEAT VENTS
(DON'T COVER)
Main Power Button
FRONT
Note: Make sure the Main Power Switch is turned on before operating.
4.2 CONTROL PANEL/ REMOTE CONTROL OPERATION
(Main Power Switch must be turned ON before using remote control.)
The touch display panel is shown on the upper right of the appliance.
+Move the battery's transparent insulating piece away before using remote control.
DIMMER
HEATER
POWER
ON/OFF
FLAME
SPEED
TIMER
易
L---一一·--·-夺�INSULATING
REMOTE CONTROL
PIECE
12
!Display
POWER
DIMMER
TIMER
Heate
回
回
Heater Vent
Remote�
0
Receiver
,Control Panel
Flame
D
i
m
m
er Color
speed
B
Turn the appliance ON/OFF.
Main Power Button
Control
Panel
Color
A
lilmer
Power
ON/OF
NOTE: Make sure the Main Power Switch on the upper right (left) of fireplace
is turned on before operating.
Control Flame brightness.
S Settings: ( Ll-L2-L3-L4-LS) Flame dims from Ll to LS. LS is the brightest
setting.
NOTE: Long-press the "DIMMER" button for 6 seconds, the appliance will go
into sleep mode. All the lights off, the heating function goes on. Long-press for
6 seconds again, the appliance will back to normal mode.
Control the Timer.
8 Settings: (1h, 2h, 3h, 4h, Sh, 6h, 7h, 8h) Press button until reach desired
setting.
13
