7
A. Water dividing pipe
：
with nine little holes, water will flow out from these little holes. And if no
water flows out, can be disassembled and cleaned.
B. Evaporator (ice-making module)
C. Ice full detecting board: Use to detect the inner cabinet is full of ice or not, and to check the the
ice-harvest process is over or not.
D
．
Water tank
：
E
．
Water supplying pipe
：
F
．
Cover board on the right side of the evaporator
：
G
．
Water level switch installing plate
：
H
．
Water drain pipe of the water tank
：
when ice-making, this pipe should be clamped in the slot of
the water tank wall; And when draining, this pipe should be pulled out.
I
．
Water pump
：
J
．
Water level detecting switch
3) Operation panel
A
．“
ADD WATER
”
light
：
When the light flashes, it means the water supplying now;
and when the light is on always, it means absence of water in unit.
B
．“
TIMER
”
light
：
When this light is on, it means setting with the TIMER
。
When the unit is turned off, can set with the ON-TIMER;
and when the unit is on, can set with OFF-Timer.
C
．“
ICE
”
light
：
If the light is on, means the unit is making ice;
And if the light flashes, means the unit is during the ice-harvest process.
D
．“
FULL
”
light
：
When the unit is full of the ice cube, the light will be on.
E
．“
CLEAN
”
light
：
When this light is on, water pump cleaning start.
When the light flashes, water pump cleaning stop.
F
．“
+
”、“
-
”
button
：
Use to adjust the ice-making process duration period length, the default setting is zero, 1
minute adding or decreasing per each pressing of “+” or “-” button.
Also to adjust the delay time of the timer, the default setting is zero, 1 hour adding or
decreasing per each pressing of “+” or “-” button.
G
．“
88
”
digital window
：
At normal condition, the number in the window is on always, it means the ambient
