14
will start to make the ice cube again. But it will restart only after 3 minutes interval of compressor
running.
5.
During the ice-making process, press the “+” or “-” button to adjust the ice-making process duration
period length, then to change the thickness of the ice cube. Press the “+” or “-” button, the digit window
will flash, the default setting is zero, 1 minute will add or decrease to each ice making process per each
pressing of “+” or “-” button. After 5 second of setting, the new setting will be remembered by the
system.
6. The bad water quality will cause the bad quality of ice cube, and reduce the transparency of the ice
cube.
Automatic self-cleaning program
Start the self-cleaning program
: After connecting all of the water pipe, plug on the main power
supply plug, then press
“
TIMER CLEAN
”
button on control panel for more than 5 seconds, to enter
the self-Cleaning program. And the “CLEAN
”
light will always be on during this period, the digit
window will indicate the left time, the water pump runs for 8 minutes and stops for 3 minutes, always
recycle. The total duration time is 30 minutes for one self-cleaning program. Also when the water
pump stops, the water will supply to the water tank automatically.
Cancel the self-cleaning program
: It takes about 30 minutes to complete one self-cleaning
program. When the program is over, the system will be in off-state automatically. And
also you can press the “ON/OFF” button on control panel to cancel the self-cleaning
program by force.
Off-Timer and ON-Timer Setting
：
How to set the ON-Timer
: During the unit is in off-state, press the “TIMER/CLEAN” button to set the
ON-Timer. The “TIMER” light will start to be on, the number in digital window will flash to display the
setting delay time. During the number flashing, press+
”、“
-
”
button to change the delay time of the timer,
the default setting is zero, 1 hour adding or decreasing per each pressing of “+” or “-” button. Five
seconds after setting, your desired setting will be remembered.
How to cancel the ON-Timer
: Press the “TIMER/TIMER” button, the number in digital window will
flash to display the present delay time of your ON-Timer, and press this button once again to cancel the
Timer setting, also the “TIMER” light will be off; And the second easy way to cancel the ON-Timer is to
press the “ON/OFF” button, it will cancel the ON-TIMER setting by force.
How to set the OFF-Timer
：
When the unit is working, press the “TIMER/CLEAN” button to set the
OFF-Timer. The “TIMER” light will start to be on, the number in digital window will flash to display the
setting delay time. During the number flashing, press+
”、“
-
”
button to change the delay time of the timer,
the default setting is zero, 1 hour adding or decreasing per each pressing of “+” or “-” button. Five
seconds after setting, your desired setting will be remembered.
How to cancel the OFF-Timer
: Press the “TIMER/TIMER” button, the number in digital window will
flash to display the present delay time of your OFF-Timer, and press this button once again to cancel
the Timer setting, also the “TIMER” light will be off; And also the second easy way to cancel the
OFF-Timer is to press the “ON/OFF” button, it will cancel the ON-TIMER setting by force, also will turn
off the unit.
