4
CARE AND MAINTENANCE
Regular cleaning of the pump may be necessary depending upon the environment in which it is operated. Clean
the pump and the impeller assembly when it is visibly soiled or when a drop in performance is detected.
Before cleaning, always disconnect the pump from the power source.
Disassemble the pump cover and remove the impeller cover to expose the impeller assembly.
Remove the impeller assembly by gently pulling on the impeller blades. Use a soft cloth or brush to clean the
impeller assembly and the inside of the impeller housing.
Remove all parts from the pump and clean in warm, soapy water.
Lift base to edge, place pump, then straighten tower
6
Use shims to level the fountain
7
①
②
a
. Two people- Carefully lift tower to top of base and
hold at an angle.
c
. After pump is placed in base, straighten tower into position.
a
. If surface under base is uneven or water is not flowing evenly from top of fountain, use shims included
to level the fountain. Insert shim on opposite side where water is not flowing.① Once positioned, break
off excess shim at notch.②
b
. While at angle, place pump in water, on
floor of base.
