2
ASSEMBLY INSTRUCTIONS
Remove cap and run plug from pump through tube in base
Replace cap, and screw hose connector to pump
1
2
①
②
③
This pump has been evaluated for use with fresh water only.
Use a proper power source as indicated on the pump label.
Keep the cord away from high temperatures or other heat sources.
Do not pump heated liquids.
Avoid heavily chlorinated water and water with high pH levels.
Do not lift the pump by its power cord.
CAUTION
a
. Remove cap from tube and set aside
for step 2.
a
. Replace cap from step 1 on top of tube in base.
b
. Run cable from pump through tube and pull through notch
in base until tag showing STOP HERE.
b
.Screw hose connector onto pump
body(clockwise) and hand tighten.
stop her
e
Arrêtez ici
Deténgase aquí
stop her
e
Arrêtez ici
Deténgase aquí
