Made in China /
中國製造
/ Hecho en China
Instruction Manual
:
Low-Voltage Power Unit for Outdoor Use
These instructions are for the low-voltage transformer Model: TS-13W24V
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be practiced including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
.
1.
Read and follow all instructions that are on the product or provided with the product.
2.
Do not use an extension cord.
3.
Reference the National Electrical Code, ANSI/NFPA 70 or Canadian Electrical Code specifically for the installation of wiring and clearances from power and
lighting conductors.
4.
Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated
construction.
5.
Do not install or use within 3.048m / 10 ft of a pool.
6.
Do not use in a bathroom.
7.
WARNING
:
Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCI protected receptacle that is weatherproof with the
power unit connected to the receptacle. If one is not provided, contact a qualified electrician for proper installation. Ensure that the power unit and cord do not
interfere with completely closing the receptacle cover.
8.
WARNING
:
Risk of Fire. Installation involves special wiring methods to run wiring through a building structure. Consult a qualified electrician.
9.
WARNING
:
Risk of Electric Shock. Mount the unit at a height greater than 1 foot (0.3 m) from the ground surface (when used outdoors).
SAVE THESE INSTRUCTIONS
–
This manual contains important safety and operating instructions for power units.
A. General Information
1. Input voltage: 120V AC/60Hz
2. Output Rating: 24V DC, 0.541A
3. Do not use this adaptor for any other product than the one it is provided with. Do not mix adaptors with different products.
B. Installation
1. This product can be installed either indoor or outdoor locations, but avoid splashing water from falling onto, or reaching the power unit. Please see the instruction
manual for the product to determine if the product is only suitable for indoor use, or for indoor and outdoor use.
2. Please install the connector of end product into the output socket of adaptor following the end product instructions.
3. General information –
a.
Damage may occur to this product if used in extreme temperatures.
b.
Do not change the wiring on the product.
c.
Please use correct voltage for your product by checking the nameplate information on the adaptor.
4. After finishing the installation, please plug into a 120V AC/60Hz electrical outlet.
WARNING:
When used outdoors, install only to a Class A GFCI protected receptacle where the power unit is protected from water or rain while plugged in (completely
covered by the outlet box while plugged in).
Do not use where only part of the power unit is protected from rain or water (outlet boxes where there is only a partial cover shall not be used for outdoor
installations).
This power unit is intended to be correctly oriented in a vertical or floor mount position.
Use this power unit only with the product it is intended for, and marked for use with, it is not for use with other products/items.
FCC Information
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Model Name: Class 2 Power Unit
Model #: TS-13W24V
Seasonal Specialties, LLC
11455 Valley View Rd
Eden Prairie, MN 55344
1-800-353-3116
CAN ICES-005(B)/NMB-005(B).
