One-Channel Video Transmitter
15
CAUTION: Remote recording is not available when in the single streaming mode.
Webcasting
You can stream live video from the transmitter to a website.
Copy the HTML Code displayed on the screen and paste
it in your web page code.
NOTE:
To use the webcasting service, you must check
the
Allow Anonymous Login
option during
3.2 System –
User/Group
setup.
MAT
Check the
MAT
box to use the MAT (Motion Adaptive
Transmission) function for live monitoring images.
Sensitivity
: Set the motion sensitivity. The higher the
number is, the more sensitive it is.
Inactivity Period
: Set the inactivity period. The
transmitter will transmit images in
Frame Rate
set
below until any change is detected after the inactivity
period when no motion is detected during the preset
inactivity period.
Frame Rate
: Select the frame rate of video to transmit images to remote systems when no motion
is detected. The selected frame rate will be applied until any motion is detected after the inactivity
period and will return to the normal frame rate set during the
Live Monitoring
setup immediately
upon detecting any motion. This frame rate cannot be set up to higher than the normal frame rate
set during the
Live Monitoring
setup.
NOTE:
The MAT (Motion Adaptive Transmission) function allows you to reduce bandwidth overload by
reducing the frame rate when no motion is detected. The transmitter considers that no motion is detected
when no change is detected between two consecutive images based on the sensitivity setting. This
function is not supported for remote recording.
3.5 Audio
You can set up audio in and out.
