One-Channel Video Transmitter
13
CAUTIONS:
When changing the port settings, you must change the port settings on remote programs too.
When using the HTTPS protocol, the ONVIF protocol might not work.
Bandwidth Control
You can control the network bandwidth by limiting the
network bandwidth depending on the network traffic.
Check the
Network bandwidth limit
box and set the
desired maximum bandwidth.
NOTE:
When limiting the network bandwidth, the frame
rate might decrease to lower than the frame rate set during
the
3.4 Video – Live Monitoring
setup
.
Security
IP Filtering
: Check the box to use the IP filtering
function. You can allow or block connections to the
transmitter by designating IP addresses.
−
Add
: Click the button to add IP addresses to the
Allow
List
or
Deny List
to allow or block connection to the
transmitter. Selecting the
Host
option allows you to add
one IP address at a time. Selecting the
Group
option
allows you to add continuous IP address numbers in one
action by designating a range of IP addresses to add.
−
Remove
,
Remove All
: Click the button to remove the
selected IP address or all IP addresses from
Allow List
or
Deny List
.
SSL
: Check the box to use the SSL function. You can enhance the security of outgoing data from
the transmitter by using the SSL (Secure Sockets Layer) protocol. When using the SSL function,
the transmitter cannot be connected with a program or a system that does not support the SSL
function. Remote Setup closes after saving the changes.
NOTES:
If you want to use the time synchronization, DVRNS and Email sending functions, the connection of
the IP addresses of the time server, DVRNS server and the SMTP server must be allowed when you
set up the IP filtering function. Any connection to the transmitter from the IP address in
Deny List
will NOT be allowed.
Using the SSL function might cause congestion in the system receiving data from the transmitter
depending on the security level.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(
http://www.openssl.org/
)
