background image

2

This is a basic installation manual for use of a network camera. Users who are using this product for the first time, as 
well as users with experience using comparable products, must read this operation manual carefully before use and 
heed to the warnings and precautions contained herein while using the product. Safety warnings and precautions 
contained in this operation manual are intended to promote proper use of the product and thereby prevent accidents 
and property damage and must be followed at all times. Once you have read this operation manual, keep it at an easily 
accessible location for future reference.

 

The manufacturer will not be held responsible for any product damage resulting from the use of unauthorized parts and 
accessories or from the user's failure to comply with the instructions contained in this manual.

 

The information in this document is believed to be accurate as of the date of publication even though explanation 
about some functions may not be incorporated. The manufacturer is not responsible for any problems resulting from 
the use thereof.  The information contained herein is subject to change without notice.  Revisions or new editions to this 
publication may be issued to incorporate such changes.

 

It is recommended that first-time users of this network camera and individuals who are not familiar with its use seek 
technical assistance from their retailer regarding product installation and use.

 

If you need to disassemble the product for functionality expansion or repair purposes, you must contact your retailer and 
seek professional assistance.

 

Both retailers and users should be aware that this product has been certified as being electromagnetically compatible for 
commercial use. If you have sold or purchased this product unintentionally, please replace with a consumer version.

Safety Symbols

Symbol

Publication

Description

IEC60417, No.5031

Direct current

In-Text

Symbol

Type

Description

Caution

Important information concerning a specific function.

Note

Useful information concerning a specific function.

Before reading this manual

Summary of Contents for CDI5510VIFWH
























Reviews: