3
/34
rev 09.2017 - ©STULZ S.p.A. - all rights reserved
1.0 GENERAL INFORMATION
This manual contains all the chiller installation, use and maintenance regulations, highlighting the related
risks and dangers.
It was expressly designed to allow its staff to use it in a safe and secure manner. Read all the information
therein carefully and be careful of the regulations marked with a symbol on the side. If not observed,
they can cause damages to things, people, the environment and the chiller.
The manufacturer is not liable for any improper use of the chiller, for unauthorized changes and for
not following the instructions contained in this manual.
The manual must be kept by the contractor and made available to the staff in charge of installing,
running and maintaining the chiller.
1.1 LIST OF ATTACHED DOCUMENTS
List of documents provided with the chiller:
Manual Part II
Thermostat Manual and Configuration Chart
Pump Manual
Manual of Various Options (if requested by the client)
1.2 WARNINGS
The chiller was designed and built for professional use based on the current regulations (see the declaration
of conformity in the Manual Part II).
The chiller is built with quality materials that underwent laboratory exams to verify its reliability and safety. It
was inspected and put under warranty.
This manual is intended for the following professionals:
INSTALLER is required to verify the correct chiller installation based on the workplace safety regulations and
the instructions contained in this manual.
OPERATOR (or user) is required to know all the workplace safety regulations, the instructions contained in
this manual for its correct use and the ordinary maintenance of the chiller.
MAINTENANCE TECHNICIAN (or assistance technician) authorised by the chiller manufacturer for technical
assistance, special maintenance and repairs.
Qualified staff means those professional figures who, given their training, education and experience as well
as their specific knowledge of the workplace safety and accident prevention regulations, are authorised by
the safety manager to perform the aforementioned activities.
DANGER
SITUATIONS WHERE THERE IS A RISK OF
ACCIDENT FOR THE OPERATOR
AND THE RISK OF DAMAGE TO THE CHILLER
ATTENTION
INFORMATION OR WARNING TO BE CAREFUL
WHEN COMPLETING A PROCEDURE OR
COMMAND
INFORMATION
IMPORTANT INFORMATION
Summary of Contents for OR Series
Page 1: ...EN rev 09 2017...
