Cosmo PDC 400, Owner'S Manual

Page: 15 / 41

Pendular Spreader PDC models
15
4.3.
4.3. 4.3.
4.3. DRIVELINE INSTALLATI
DRIVELINE INSTALLATI DRIVELINE INSTALLATI
DRIVELINE INSTALLATION
ON ON
ON
Before using the pto shaft, please consult the use and maintenance manual attached to the
Before using the pto shaft, please consult the use and maintenance manual attached to the Before using the pto shaft, please consult the use and maintenance manual attached to the
Before using the pto shaft, please consult the use and maintenance manual attached to the
pto shaft
pto shaft pto shaft pto shaft....
In case that the pto shaft, supplied with the machine, is not used, please check that the cowlings of
the machines and of tractors are overlapped to the pto shaft’s shield of 5 cm., at least.
For a correct and safe operation of the machine, please use exclusively pto shafts with CE mark
pto shafts with CE mark pto shafts with CE mark pto shafts with CE mark....
P
P P
Please use pto shafts with integral shields
lease use pto shafts with integral shields lease use pto shafts with integral shields
lease use pto shafts with integral shields
•
Grease periodically, the pto shaft following the instruction supplied by the pto shaft manufacturer
(see the use and maintenance manual of the pto shaft).
•
Observe the sense of assembly of the pto shaft, as indicated by the manufacturer and shown on
the outer cover of the shield (tractor drawing on the external tube of the pto shaft towards the
power take-off of the same tractor).
•
Fasten the safety ant-rotation chains after making sure that the connection between the pto shaft
and the gear box is well locked. Use for this connection an hexagonal head screw 8.8 10x70 UNI
5737 with the relative nut.
ATTENZIONE! ATTENZIONE! ATTENZIONE! ATTENZIONE!
Check the rotation sense and the speed regulation of the power take
Check the rotation sense and the speed regulation of the power take Check the rotation sense and the speed regulation of the power take
Check the rotation sense and the speed regulation of the power take----off of
off of off of
off of
the tractor to be at 540 rpm, as the machine is projected for this kind of the tractor to be at 540 rpm, as the machine is projected for this kind of the tractor to be at 540 rpm, as the machine is projected for this kind of the tractor to be at 540 rpm, as the machine is projected for this kind of
speed
speed speed speed....
The length of the pto shaft must be adapted to the type of used tractor..
When the pto shaft is released from the power take-off of the tractor must ALWAYS be laid on the
appropriate support.
COSMO Company is not responsible for the damages caused by an inc
COSMO Company is not responsible for the damages caused by an inc COSMO Company is not responsible for the damages caused by an inc
COSMO Company is not responsible for the damages caused by an incorrect assembly and use of the
orrect assembly and use of the orrect assembly and use of the
orrect assembly and use of the
pto shaf pto shaf pto shaf pto shaftttt....
4.4. 4.4. 4.4. 4.4. HYDRAULIC SYSTEM INS HYDRAULIC SYSTEM INS HYDRAULIC SYSTEM INS HYDRAULIC SYSTEM INSTALLATION TALLATION TALLATION TALLATION (OPTIONAL) (OPTIONAL) (OPTIONAL) (OPTIONAL)
In order to recognize the element used, please refer to the tables 08 and 09 of the chapter 8 (Parts
breakdown).
1. Assemble the connection plate for hydraulic opening system (ref. 8) on the gear box by using the
screw and the nut (C) already on the gear box.
2. Fixing the hydraulic cylinder (ref. 1) to the connection plate (ref. 8) by using the screw (ref. 4)
hexagonal head 8x30 (mod. PDC 400) or hexagonal head 8x25, the self-locking nut M8 ( ref. 6),
the two washers 8x17 (ref. 7) and the bushing 13x8x7 (ref. 9).
3. The hydraulic cylinder stem must be connected to the lever plate in the hole B. Insert the screw
hexagonal head 12x60 (ref. 3) in the hole B, screw up the nut M12 (ref. 10) insert the screw in
one of the two cylinder holes and fix it by the self-locking nut M12 (ref. 5)