Cosmo COS-HAF859, User Manual

Page: 14 / 17

will flash
, push key A to switch to set hours and minutes, and then push C
or E to set the correct time. The Clock’s system is 24 hours.
When the motor is on, push the key B, the light is on, at the same time it
shows
" "
is flashing as well on the digital display
，
and to push
key B to switch hours and minutes
. To set
the time to
automatically shut off the motor
, push
key C or E. Push key B for 3 seconds
to stop the delay timer.
Push key C or E,
when
the first speed is on, and it shows ―
‖ on the digital
display
，
and push key C once again to turn
it
off
；
To run the 2
nd
, 3
rd
and ―Turbo‖ speed, then push Key E. If it’s ―Turbo‖speed
is
on, then
push E once again to turn
it
off; and push key C down to 3
rd
, 2
nd
and 1
st
speed.
Push the key F, the light is flashing, and it shows― ‖ flashing on
the digital display
，
to push key F to switch hours and minutes
，
and to set
the alarm time by pushing the key C or E. To stop the alarm, push the
key F. And to cancel the alarm set, then push the key F for 3 seconds.
‖ on the digital display, Push the key G
to on the light
, and it shows ―
and push the G again to turn off the light.
•COMMANDS:
(Fig.23)
A= Timer (automatic shut off)
B= Speed 1 / adjust / switch off
C= digital display screen (showing timer and speed)
D= Speed 3 / adjust / switch off
E= Light
When pushing A, digital display screen shows "15 minutes" for
the
timer,
and the minutes can be adjusted by pushing "+" or "-" on B and D.
When the
first speed is
activated
, pushing A once
will
switch
it
off,
and
the digital
display
will show
"00". When pushing B,
the display
shows "F1" on the ,
and the first speed is on. Pushing B once to switch
it
off, and the digital
display
will show
"00".
When pushing D, it shows "F3" on the digital display screen, and the third
speed is on. Pushing D twice
to switch it
off, and it shows "00" on the
screen. The second speed F2 and Turbo speed F4 can be adjusted by pushing
B or D.
When pushing E, the buttons light is on and the light is on, only push E once
again to switch off the light.