background image

WARNING:

 Gas leaks cannot always be detected by smell. 

Gas suppliers recommend that you use a gas detector approved by UL or 
CSA. 

For more information, contact your gas supplier. 

WARNING:

 Do not install a ventilation system that blows air downward 

toward this cooking appliance. This type of ventilation system may cause 
ignition and combustion problems with this cooking appliance resulting in 
personal injury or unintended operation. 

Your safety and the safety of others are very important.

 

We have provided many important safety messages in this manual and on 
your appliance. Always read and obey all safety messages. 

DANGER 

WARNING 

You can be killed or seriously 
injured if you don't immediately 
follow instructions. 

You can be killed or seriously 
injured if you don't follow 
instructions. 

A potentially hazardous situation 
which, if not avoided, could result 
in minor or moderate injury. 

CAUTION 

All safety messages will tell you what the potential hazard is, tell you how 
to reduce the chance of injury, and tell you what can happen if the 
instructions are not followed. 

This is the safety alert symbol. 

This symbol alerts you to potential hazards that can 
kill or hurt you and others. 

All safety messages will follow the safety alert symbol 
and either the word "DANGER," "WARNING" or 
"CAUTION." These words mean: 

Summary of Contents for COS-GRT366



















































Reviews: