20
CHOOSING AND USING THE BRUSHES
POLYPROPYLENE BRUSH (PPL)
Used on all types of floors. Good resistance to wear and tear, and hot water (no greater than 60°C.). PPL is non-hygroscopic and therefore retains its
characteristics even when working in wet conditions.
NYLON BRUSH
Used on all types of floors. Excellent resistance to wear and tear, and hot water (even over 60°C). The nylon is hygroscopic and so tends to lose its
characteristics over time when working in wet conditions.
ABRASIVE BRUSH
The bristles of this type of brush are charged with highly aggressive abrasives. It is used to clean very dirty floors. To avoid floor damage, work only
with the pressure strictly necessary.
BRISTLE THICKNESS
Thicker bristles are more rigid and are therefore used on smooth floors or floors with small joints.
On uneven floors or those with deep joints, it is advisable to use softer bristles which can enter the gaps more easily.
Remember that when the bristles are worn and therefore too short, they will become rigid and are no longer able to penetrate and clean deep down.
In this case, like with over-large bristles, the brush tends to jump.
PAD HOLDER
The pad holder is recommended for cleaning shiny surfaces.
There are two types of pad holder:
1.
The traditional pad holder is fitted with a series of anchor points that allow the abrasive floor pad to be held and dragged while working.
2.
The CENTRE LOCK type pad-holder not only has anchor points, but also a snap-type central locking system in plastic that allows the abrasive
disc to be perfectly centred and held without any risk of it becoming detached. This type of holder is especially suitable for machines with
several brushes, where it is difficult to centre the abrasive discs.
TABLE FOR CHOOSING THE BRUSHES
Machine
No.
of
brushes
Code
Type of bristles
Bristles
Brush
Notes
ABILA 17
1
405644
405645
405646
405647
405529
405530
PPL
PPL
PPL
Abrasive
Pad holder h=40
Pad holder h=60
0.3
0.6
0.9
1
420
420
420
420
420
420
ABILA 20
1
405661
405654
405658
423760
PPL
PPL
Abrasive
Pad holder
0.45
0.7
1
500
500
500
500
ABILA 42
2
405578
405579
405580
405581
405510
405531
PPL
PPL
PPL
Abrasive
Pad holder
Pad holder
0.3
0.5
0.9
1
210
210
210
210
200
200
ABILA 52
2
405601
405604
405602
405603
405513
PPL
PPL
PPL
Abrasive
Pad holder
0.3
0.5
0.9
1
255
255
255
255
245
