14
WORK
OVERFLOW DEVICE
The machine is fitted with a float which intervenes when the recovery tank is full, causing the suction
tube to close. In this case, it is necessary to empty the recovery tank, removing the drainage tube
cap.
WARNING!
This operation must be carried out wearing gloves to protect against
contact with dangerous solutions.
FORWARD MOVEMENTS (machines without traction)
The traction of these machines is obtained by means of the brush(es) which, working slightly
inclined, drag the machine forwards. To move the machine, you must raise the brush base and then
move it via the knobs on the handlebars.
WARNING!
when making even brief reverse movements, verify that the squeegee is raised.
FORWARD MOVEMENTS (machines with traction)
These machines are equipped with electronically commanded traction, with two speeds forwards and
one backwards.
To move the machine forwards, you must turn the key (1), wait three seconds then press on the
"man present" levers. To move the machine backwards, use the button beneath the handlebars.
Press the lever by just a few millimetres to engage the first gear, or press it completely to insert the
second gear.
For backwards movements, the speed is reduced
WARNING!
when making even brief reverse movements, verify that the squeegee is raised.
