FMA SERIES
29
Check the oil level every 50 hours, making sure it reaches the level plug on the transmission cover.
If the oil is below this level, fill up oil till restore the level.
The oil change must be performed every 200 working hours.
To make the oil change:
•
remove the skid from the transmission side;
•
place a tank under the oil level plug;
•
unscrew the oil level plug and drain completely the oil into the tank;
•
retighten the level plug;
•
unscrew the oil filling plug (top of transmission cover);
•
fill up oil till restoring the correct level (until level plug);
•
retighten the filling plug;
•
replace the side skid;
•
dispose the discharged oil into containers for used oil.
6.4.
BEARING HOUSING LUBRICATION
Lubricant: SAE multi-purpose lithium-type grease
Grease the rotor hub supports every 8 working, through a suitable grease gun.
IMPORTANT
Make sure to clean the fitting zerk before using grease gun.
Do not let excess grease collect on or around parts, particularly when operating in sandy areas.
6.5.
DRIVESHAFT MAINTENANCE
Lubricant: SAE multi-purpose lithium-type grease
Grease crosses, sliding parts of protective shielding and driveshaft transmission tubes.
Summary of Contents for ROTARY HOE FMA 105
Page 40: ...NOTES ...
Page 41: ...NOTES ...
