FMA SERIES
24
•
loosen the in the front of the skid (bolt 1 - see picture);
•
unscrew and remove the bolt on the rear of the skid (bolt 2 - see picture);
•
adjust the height of the skid through the holes, as desired;
•
reinstall the bolt 2 (refer to the tightening table of this manual for proper torque values);
•
tighten the bolt 1 (refer to the tightening table of this manual for proper torque value).
When finished, verify that both skids are at same level, and check if the front of the hoe is leveled to
the back, when lowered to the ground. Adjust with the 3-point top link if necessary.
REAR BOARD ADJUSTMENT
The FMA-Series hoes are equipped with a rear board with chain.
The position of the rear board is adjustable by varying the number of chain links included between
distance XY, which remain tensioned under the weight of the board (i.e. links between the rear board
hole1 and the slot of the frame 2).
•
to raise the rear board, reduce the number of chain links in tension. This operation, together with
the increase of the tractor ground speed, allows to have a coarser soil texture;
Summary of Contents for ROTARY HOE FMA 105
Page 40: ...NOTES ...
Page 41: ...NOTES ...
