12
Bedienungs- und Montageanleitung für Cosiconcrete/ Operating and assembly instructions built in burners / manuel de montage et mode démploi
If the Cosiconcrete is installed properly, you can place lava rocks and
ceramic logs on the top. Grab first the small lava stones and place them on
the ground. Every Cosi fires is deliverd with 1.5kg small lava stones and
1.5kg large lava rocks included. Take the small lava stones without grit and
place it gently on the model Repeat the same with the big lava stones and
make sure it is covered with lava rocks. Make sure you keep the ignition unit
free of lava stones
. After placing the lava rocks,get the ceramic logs out of
the packaging. The Cosiconcrete is always included with four ceramic logs.
The ceramic logs insert a campfire in the fire ring back. Make sure the fire
ring is minimal covered by the logs. When the logs block the fire ring, there
will be a dangerous situaties. The blockade of the fire ring will affect the air
flow of the ring and the flames will be different. This results in dangerous
situations!
If you want to reorder the lava stones or ceramic logs, this is possible at your
purchase address.
When you are going to use the Cosiconcrete for the first time, make sure
that the device is turned at the highest setting for 15 minutes. In this way,
the lava stones are heated through and this ensures that any bumps or air
bubbles will disappear from the lava rocks
When you want to move or cleanup the lava stones and ceramic logs, make always sure that they have
cooled down completely.
The lava rocks and logs can be scorching black in time. This has to do with soot formation which always occurs in
devices which show a yellow flame. This soot can be removed by blowing / vacuuming with a vacuum cleaner.
The carbon black may be also brushed off with a dry brush.
