11
Bedienungs- und Montageanleitung für Cosiconcrete/ Operating and assembly instructions built in burners / manuel de montage et mode démploi
17.
Never move the Cosiconcrete if the device is in use . Wait at least 1.5 hours after use before moving it.
Shut off the valve at the gas cylinder or the regulator before moving the appliance.
18.
Never leave the Cosiconcrete during use without supervision
19.
The device has an open fire , make sure that during use of the Cosiconcrete there will always be
supervision on children and pets by a mature and responsible person.
20.
Do not touch the lava rocks and ceramic logs until it is completely cooled down
21.
Turn off the gas supply after use.
22.
Wait at least 1 hour after use before placing the SS cover on the unit . If the cover is placed before the
Cosiconcrete is complete cooled down there can be occurs damage to the cover, or even a fire may
occur.
23.
The Cosiconcrete is designed to bring warmth and should only be used outdoors .
24.
Always use the prescribed gas cylinders as described in this manual .
25.
In case of violent wind precautions must be taken against tilting of the appliance.
26.
Be careful, accessible parts may be very hot . Always keep this user and installation manual of the
equipment.
27.
Ensure that the hose is always bent straight down towards the cylinder and
never printed against hot surfaces of the model.
28.
The Cosiconcrete should always be used outdoors or in well -ventilated areas.
This could include greenhouses or conservatories . An amply ventilated area
must have a minimum of 25% of the surface open. The surface area is the sum
of the walls surface.
2 . Installation instructions according collection: Cosiconcrete
The Cosiconcrete is supplied complete with pressure regulator (30 mbar) and gas hose. You only need to
purchase a gasbottle. These can be purchased at your local gas supplier.
1. Installing the Cosiconcrete
Get your Cosiconcrete carefully from its packaging. Select the location for your Cosiconcrete. The location must
meet the following conditions:
-
Make sure that the Cosiconcrete is placed on a paved (preferably stone) surface. The surface should be
completely flat and clean
-
The Cosiconcrete should be placed at least two meters away from flammable materials and liquids.
Get the hatch from the Cosiconcrete and gently lay the hatch down on the floor. Before Cosiconcrete is ready for
use you should place an AA battery for the piezo ignition.
