Cosen SH-7550S, Instruction Manual

Page: 40 / 118

4 ‐ 6
8. Blade speed indicator
The blade speed is shown here in predetermined unit (M/min or fpm) and the blade speed can be
adjusted by blade speed control knob .
All parameter settings have been done by Cosen factory before shipment. Please do not make
any random change to the parameter as it may affect the accuracy of the blade speed reading. Please
consult your agent shall there be any need to reset machine parameters.
9. Lift roller feed backward button (optional)
When the lift roller is at its upper position, press this button to feed the material backward at the
speed selected by the feed speed selector.
This function is available only when the optional hydraulic lifting take ‐ in roller with power
feeding table is equipped.
10. Lift roller feed forward button (optional)
When the lift roller is at its upper position, press this button to feed the material forward at the
speed selected by the feed speed selector.
This function is available only when the optional hydraulic lifting take ‐ in roller with power
feeding table is equipped.
11. Lift roller up/down switch
The lift roller is designed to help users save efforts feeding and adjusting material. When switched to
the right, lift roller ascends to lift the material up. When switched to the left, lift roller descends to
lower the material.
When the vise starts to clamp the material while the lift roller is still at its upper position, the
lift roller will automatically descend slowly as a safety design to help ensure the squareness of the cut.
The lift roller can be operated only when the vise is unclamped (turned to the open position).
12. Vise open/clamp knob
Turn the knob to the left to open the vise. Turn the knob to the right to clamp the vise. Turn and hold
the knob for 3 seconds and let it go; the vise will automatically close until it is fully clamped.
For the blade to start running, the vise open/clamp knob must be turned and held to the right
for 3 seconds as to ensure the vises are fully clamped.
13. Lift roller feed speed selector