Cosen SH-3026L, Instruction Manual

Page: 26 / 106

3 ‐ 4
2. Use a forklift
Most users choose this method to move their machine because it is easy to set up. Make sure that
the lifting rod can fully withstand the weight of the machine.
(Refer to Section 2 – General Information for
Specifications)

Machine lifting is likely to damage the machine
if not performed properly.
You must have a qualified forklift operator to
perform the job.

You must apply proper forklift technique to
avoid damage to the machine.
Make sure the forks are able to reach in
at least 2/3 of the machine depth.

You must keep the machine balanced at all
times.
Make sure the forks are centered
before use.
(Illustration only. Please follow user guide of your forklift.)
3. Use rolling cylinders
You can use rolling cylinders to move your machine in a small machine shop environment.

You must use rolling cylinders made in material
of proper compressive strength.