To manually turn the boiler on or off, you must press
the
top button
.
To reset device to factory settings and reconfigure internet
settings, you must press the
back left button
.
To set the device to pairing mode, you must press the
back right button.
BUTTONS
Top Button
Back left
Button
Power Led
Led Status
Pairing Led
Wi-Fi Led
-
Heater Led
On
Off
Steady light is on
Light is off.
Remote software update
in progress
Light blinks quickly.
Light blinks slowly.
-
If the 220V power cable is
plugged in but the led
light is not on, ensure that
there is not a power
outage.
Connected
Pairing incomplete
Alarko by Cosa cannot
communicate with paired
device
Alarko by Cosa is ready
for pairing
If Alarko by Cosa cannot
communicate
with paired device, ensure
that the other device is not
located too far and that it is
turned on.
Alarko by Cosa is connected
to the Internet
Internet connection
settings incomplete
Alarko by Cosa cannot connect
to the internet
Alarko by Cosa is ready for
internet connection settings
to be completed
If Alarko by Cosa cannot
connect to the internet,
check your internet
connection.
Heater on
Heater off
-
-
If the led is on but the boiler
does not work, ensure that the heater
connection cable is installed and
that your heater is not
malfunctioning.
Experiencing an issue ?
Back Right
Button
ABC-WHU-IM-4.2
Summary of Contents for Alarko
Page 5: ......
