INSTALLING
THE CABLES
To connect the heater connection or power
cable to the Alarko by Cosa Heater Unit, you
must remove the orange cover. Once the 220V
power cable is installed to Alarko by Cosa Heater
Unit, the power led on the front cover must
turn on.
HEATER INSTALLATION
To control your heater, you must connect your Cosa
to the heater’s on/off-type room thermostat
connection.
If you already have an on/off-type room thermostat
connected to your heater, you can remove this cable
extending from your heater to your thermostat and
connect it to the Alarko by Cosa Heater Unit.
If you don’t have a thermostat connected to your
heater, continue to the next step for installation
instructions.
To connect the Alarko by Cosa to your heater, you
must first ensure that both electricity and gas are
turned off. Consult your heater’s user manual or
authorized technical service to install the room
thermostat connection cable to your heater.
A.
If wireless internet is available where your heater is located, you can connect
the Wireless Heater Control Unit to the internet and use the Alarko by Cosa Smart
Thermostat with batteries, as well.
B.
If wireless internet isn’t available where your heater is located,
you must power the Alarko by Cosa Smart Thermostat with
the adapter.
I will use the Alarko by Cosa Smart Thermostat with my Wireless Heater Control Unit.
+
A
B
PLACEMENT
Summary of Contents for Alarko
Page 5: ......
