69
Page
MANUAL
We reserve the right to modify the product and the design.
MAINTENANCE
Replacing the coolant
1. Unscrew the cap from the reservoir (1) in an anticlockwise direction and wait a few seconds until the vapours disperse.
2. Place a container beneath the radiator.
3. Unscrew the radiator cap (2) anticlockwise and drain the coolant.
4. Place a container underneath the connecting (3) and release it to drain the fluid.
7. Tighten the radiator cap (2) and the sleeve (3).
8. Add coolant up to 50 mm below the mouth of the cap closure (1).
9. Close the reservoir cap (1) and start the engine.
10. Check that the coolant level is correct.
11. If the fluid level is low, add the required amount through the filler cap and repeat the operation.
2
1
3
Summary of Contents for TERRAIN DX4 CAB
