CORVUS TERRAIN DX4 CAB, Workshop Manual

Page: 31 / 136

31
Page
WORKSHOP
MANUAL
We reserve the right to modify the product and the design.
MULTIFUNCTION PANEL
- The counter associated with maintenance-by-time will not activate until the vehicle has covered a distance of at least 10 km.
- To do the “reset’’ the speed must be 0 km/h.
- To reset the service values, we have to press the MODE button while we turn the engine on. After 10 seconds, the service icon will remain fixed. If
we stop pressing MODE, we will have a 10-second time-out to press the TRIP button, which we have to keep pressed for 5 seconds until the reset is
accomplished. At that time, the display will show the value of 100 h.
- The service reset will establish the next revision at 1,500 km, 1 year and 100 hours, without taking into account the values prior to the time of the
reset.
- The maintenance time in hours is updated every 30 minutes. If the user disables the battery, he or she can lose up to 29 minutes. This will happen
as long as the vehicle's battery is switched off.
24H clock
The clock is displayed in the 24H format (HH:MM). How to set the time:
• Select the function odometer using the MODE button. Or press the MODE button for more than 2 seconds (until the two hour digits flash).
• Repeatedly press the TRIP button to increase the hour digits, or leave the TRIP button pressed to increase the hours.
• Press the MODE button to accept the hours and change the field to the minute units.
• Repeatedly press the TRIP button to increase the minute units, or leave the TRIP button pressed to increase the minutes, or press the MODE
button to confirm the minutes and exit the clock setting function.
• If you do nothing for more than 10 seconds, and if you have not pressed any button, the clock setting function is exited automatically.
• If you have changed the hour or minutes, but you do not save them, the time-out will be 20 seconds.
• You can only change the time if the vehicle is completely stopped, without any speed pulses being received.