for a blue flashing LED. Otherwise check accessory wire crimp and
circuit has power.
Each module is assembled and tested by us prior to shipping and
expected to work if properly installed.
Tuck and secure any extra wires away from moving parts and test
operation.
Installation 2
:
(To factory 10-pin plug in trunk/hatch)
Alert!
The 12-disc Changer (if present) must be disconnected
1.
Locate factory 10-pin CD Changer plug in trunk/hatch or if vehicle has
12-disc CD Changer, disconnected 10-pin plug (See
Fig. 7
) from
Changer (See
Fig. 6
)
Fig. 6
Factory CD Changer
2.
Connect factory 10-pin plug (See
Fig. 7
) to 10-pin connector (white) on
installation harness (
See Fig. 8)
Fig. 7
10-pin plug
Fig. 8
10-pin connector
3.
Proceed to step 4 on page 2 above to complete the rest of the
installation.
