Introduction
Many C5 owners will be pleased to know they can upgrade their audio system to
support Bluetooth music streaming without replacing the factory radio. The BLU-
C5 connects directly to Radio
OR if vehicle is wired with 10-pin plug for optional
12-disc CD Changer in hatch or trunk; connection can be made there
. If vehicle
has a 12-disc CD Changer,
it must be disconnected or
purchase our
which retains 12-Disc Changer operation. A Bluetooth wireless connection means
no wires, clutter or complicated setup. Pair Smartphone or Tablet and enjoy
navigation, internet music sites, audio books and more on the car system. This
guide covers the basic install steps for the BLU-C5 in 1997-04 Corvette without
12-disc Changer or if present if must be disconnected.
Alert:
If your kit includes the black module,
instructions.
See Frequently Asked question at the end of this guide.
Installation 1: (
To Radio
)
It is possible to install this module to the radio or CD Changer location in
trunk/hatch. (See installation 2 below)
Remove Radio from dashboard to gain access to the connectors. (
Click link
below for radio removal instruction video)
https://www.youtube.com/watch?v=Gcrlufo1ctc
https://www.youtube.com/watch?v=WTbWYNJTSDs
1.
Disconnect factory 20-pin plug from Radio (See
Fig. 1
)
Fig. 1
C5 Radio connector
2.
Connect vehicles 20-pin plug from step 1 to 20-pin connector (white)
on installation harness (See
Fig. 2
).
Fig. 2
Radio position install harness (PXHGM4)
3.
Connect 20-pin plug (black/gray) from installation harness (See
Fig. 2
)
to 20-pin connector on Radio vacated in step 1
4.
Ensure module dip-switches
#3 and #8
are set to “ON”
or down
(See
Fig. 3
)
Fig. 3
