User’s Manual: SW-10200
Trademarks
Copyright © i3 International Inc. 2012.
Contents subject to revision without prior notice.
All other trademarks belong to their respective owners.
Disclaimer
i3 International does not warrant that the hardware will work properly in all environments and
applications, and makes no warranty and representation, either implied or expressed, with respect to the
quality, performance, merchantability, or fitness for a particular purpose. i3 International has made every
effort to ensure that this User's Manual is accurate; i3 International disclaims liability for any
inaccuracies or omissions that may have occurred.
Information in this User's Manual is subject to change without notice and does not represent a
commitment on the part of i3 International. i3 International assumes no responsibility for any
inaccuracies that may be contained in this User's Manual. i3 International makes no commitment to
update or keep current the information in this User's Manual, and reserves the right to make
improvements to this User's Manual and/or to the products described in this User's Manual, at any time
without notice.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the Instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at whose own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
Energy Saving Note of the Device
This power required device does not support Standby mode operation.
For energy saving, remove the power cable to disconnect the device from the power circuit.
Without removing power cable, the device will still consume power from the power source. In the view of
Saving the Energy and reduce the unnecessary power consuming, it is strongly suggested to remove
the power connection for the device if this device is not intended to be active.
WEEE Warning
To avoid the potential effects on the environment and human health as a result of the
presence of hazardous substances in electrical and electronic equipment, end users
of electrical and electronic equipment should understand the meaning of the crossed-
out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and
have to collect such WEEE separately.
Revision
i3 International 8 x 10/100 PoE+ 802.3at plus 2 Gigabit Combo Ports RJ45/SFP Switch
Web Sma
rt Switch User’s Manual
FOR MODELS: SW-10200
REVISION: 1.4.2
