User’s Manual: SW-10200
10
3.2. Administration
3.2.1. Authentication Configuration
Clicking on
Administrator
in the navigation pane will bring up administrative options on the main pane. If this
is your first login, change the username and password in the Authentication Configuration section.
Figure 7 - Set the username and password
3.2.2. System IP Configuration
This page sets information on the system configuration including the current IP address, subnet mask and
gateway.
Figure 8 - Configure the switch IP
Parameters are as follows:
IP address: Manually assign the IP address of the switch. The default IP Address is:
192.168.0.10
(for
switches with the F/W version V141015 or newer) or
192.0.0.20
(for switches with the F/W version V110613
or older).
Subnet Mask: Assign the subnet mask to the IP address.
Gateway: Assign the network gateway. Default gateway is:
192.168.0.254
(for switches with the F/W version
V141015 or newer) or
192.0.0.254
(for switches with the F/W version V110613 or older).
IP Configure: Choose between Static or DHCP network IP assignment.
Click
Update
to save your changes. Note: Changing the IP address will require a reboot.
