Cortex SS2, User Manual

Page: 15 / 26

15
45 41
44
42
40
46
37
53
54
54
53
56
48
65
64
65
55
1
55
43
42
7
ASSEMBLY INSTRUCTIONS |
STEP 5
#42
Φ
8 4pcs
#43 M8x40 2pcs
#46 M8X20 2pcs
1. Connect the seat cushion (#41) to the seat cushion frame (#40), and put the frame (40#) into the seat
cushion frame (#7) secured with spring pull pin (#37).
a. Use 2x pan head screws M8x40mm (#43) and 2x
Φ
8 washer
2. Connect arm pad (#45) to arm frame (#44).
a. Use 2x pan head screws M8x20mm (#46) and 2x
Φ
8 washer (#42).
3. Insert 2x foam tube (#53) through the sleeves located on the seat cushion frame (7#) and swing arm (48#).
a. Secure with 4x foam roll (#54), and 4x foam pipe plug (#55).
4. Connect arm frame (#44) to the cushion frame (#7) with spring pull pin (#37). Connect the foot
pedals (#56) to ground piece (#1).
a. Use one foot tube (#64), and insert the two plugs (#65).