Cortex Omega LGP-10, Owner'S Manual

Page: 8 / 11

- 7 -
ASSEMBLY INSTRUCTION
NOTE:
It is well suggested that two or more people to assemble this machine to
avoid any possible injury.
Remove all the security tape and wrapping before the installation.
Step 1
1. Install the Bottom support tube (9) to the Upright tube (1L/R) with Hex screw (40), Flat washer
(29), Connection board 1 (15), Nylon nut (39).
2. Install the Front support tube (12) to the Upright tube (1L/R) with Hex screw (40), Flat washer
(29), Connection board 2 (16), Nylon nut (39).
3. Install the Rear bracket (2) to the Bottom support tube (9) with Hex screw (28), Flat washer (29).
4. Tighten all the bolts above.