- 10 -
Step 2
1.
Put the Cushion (72), Slider (63), Weight block(10kg) (71), Weight block(5kg) (70), and Guide
block (65) on the weight frame (1) in sequence.
2.
Fixed the Slider (63) on the weight frame (1) with E snap ring (61).
3.
With the sequence from small to big, from up to down, stick the weight notes on the Weight
block (5kg) (70) and Weight block(10kg) (71).
4.
Pre insert the Magnetic cross pin with wire (69) into the weight blocks and Pull rod (67).
Step 3
1.
Back out the Bolt (83), screw down the Handle (12), and insert Connecting board (6) into the
Main frame (4), and then lock the Bolt (83) into the Main frame (4).
2.
Lock the Guide plate (5) and Adjusting tube (7) separately in the weight frame (1) with Bolt (36),
End cap (35) and Short bearing (53). when installing the Adjusting tube (7), need to pull up the Plig
pin 1(23), to match the hole of Guide plate (5).
3.
Lock the Weight (9) tightly in the Adjusting tube (7) with Bolt (39), Flat washer (38) and Nylon
nut (37).
Summary of Contents for LGE-10
Page 5: ... 4 Exploded Drawing ...
Page 8: ... 7 ...
