Cortelco C62 VoIP Phone User Manual Download

Page: 71 / 84

8.3.6.4

Update

This page allows uploading configuration files to the phone.

Update

Field Name

Explanation

Web Update

Web Update

Browse to the config file, and press Update to load it to the phone.

Various types of files can be loaded here including firmware, ring

tones, local phonebook and config files in either text or xml format.

TFTP/FTP Update

Server Address

FTP/TFTP server address for download/upload. The address can be

IP address or Domain name with subdirectory.

User

FTP server Username for download/upload.

Password

FTP server password for download/upload.

File name

Name of update file or config file. The default name is the MAC of

the phone.

Note:

The exported config file can be modified. The config file is made up of modules.

Modules which do not need changes may be deleted. For example, a config file can be

downloaded and all modules removed except the SIP module. After rebooting, only the SIP

settings will be changed.

Summary of Contents for C62 VoIP Phone





















































































Search results

Summary of Contents for C62 VoIP Phone

Reviews:

Related manuals for C62 VoIP Phone

Brands by name

Popular brands

Cortelco C62 VoIP Phone, User Manual

Search results

Summary of Contents for C62 VoIP Phone

Reviews:

Related manuals for C62 VoIP Phone

Brands by name

Popular brands