Cortelco C62 VoIP Phone User Manual Download

Page: 30 / 84

Field Name

Explanation

Network

Shows the configuration information for WAN and LAN port,

including connection mode of WAN port (Static, DHCP, PPPoE),

MAC address, IP address of WAN port and LAN port, DHCP server

status for LAN port (ENABLED or DISABLED).

Accounts

Shows the phone numbers and registration status for the 6 SIP LINES

and 1 IAX2 server.

8.3.1.2

Wizard

Select the appropriate network mode. The phone supports three network modes:

Static: The parameters of a Static IP connection must be provided by your ISP.

DHCP: In this mode, network parameter information will be obtained automatically from a

DHCP server.

PPPoE: In this mode, you must enter your ADSL account and password.

Refer to Section 2.2 for detailed information about configuring the network parameters.

Summary of Contents for C62 VoIP Phone





















































































Search results

Summary of Contents for C62 VoIP Phone

Reviews:

Related manuals for C62 VoIP Phone

Brands by name

Popular brands

Cortelco C62 VoIP Phone, User Manual

Search results

Summary of Contents for C62 VoIP Phone

Reviews:

Related manuals for C62 VoIP Phone

Brands by name

Popular brands