586002TP227F User’s Manual
16
PART III ADVANCED SETTINGS
22
Advanced Settings Menu
The Advanced Settings menu gives you access to the following options:
RESET
HANDSET
CHANGE
PIN
REGISTER
SELECT
BASE
DEREGISTER
To access these options, from the idle mode:
Press
Menu/OK
, and then press
▲
or
▼
until you see
>Adv. Settings
.
Press
Menu/OK
again. Press
▲
or
▼
to choose from the list of options above.
Reset Handset
To restore your Handset to all factory preset settings:
When you see
>Reset handset
, press
Menu/OK
.
Your will see Enter HS PIN: :____.
Enter the 4-digit Handset PIN (preset to
0000
).
Scroll
▼
to
>YES
, and then press
Menu/OK
.
Change Pin (Handset)
Your Handset PIN is factory preset to
0000
. To prevent unauthorized adjustment of the advanced Handset settings,
you can select a new 4-digit PIN (this is optional; you do not have to change the PIN):
Scroll
▼
to
>Change PIN
, and then press
Menu/OK
.
Your will see Enter Old PIN :____.
Enter the current 4-digit Handset PIN.
Enter the New Pin :____.
Verify the New Pin :____. You will see Pin Changed.
Press
DEL/Mute
twice to return to the idle screen.
Registration (of Handsets)
Your Handset is registered to the Base at the factory. Registration allows a Handset to communicate with a Base. You
can register
5
additional Handsets (model
588002TP227F
) to the Base. To register an additional Handset to the Base:
Auto Registration
(Recommended)
Charge the ‘new’ Handset in its cradle overnight. You will see
Not Registered
on the display. Place it in the Base.
In a short while, usually 60 seconds or less, the new Handset will be registered. The Handset will be assigned a
number, located in the lower left corner of the display.
Manual Registration
Press and hold
PAGE
on the Base (for approximately 3 seconds) until you hear a soft beep.
In the
Advanced Settings
menu, scroll
▼
to
>Register
, and then press
Menu/OK
.
You will see
Select Base
. Scroll
▼
to the desired Base. If you have one Base, scroll
▼
to
>Base 1
. Press
Menu/OK
again.
You will see Please Wait… When prompted, Enter Base PIN: :____.
You will see
Please Wait…
A tone will confirm registration. The idle screen will be displayed.
