background image

 

 

 
 

 

 

586002TP227F User’s Manual

 13 

Editing Phonebook Entries 

In the idle mode, press 

 to access the Phonebook. 

Press 

 or 

 to find the desired Phonebook entry. 

Press 

Menu/OK

. You will see 

>Edit Entry

. Press 

Menu/OK

 again. 

Use 

DEL/Mute

 to delete letters; use 

 & 

 to move the cursor back & forth. 

 

NOTE:

 If consecutive letters of the name are located on the same key, you will need to use 

between them. 

 

Press 

Menu/OK

. Now, edit the phone number. Press 

Menu/OK

 to confirm. 

Now, follow the instructions in 

SPECIAL RING

 below. 

 

Special Ring 

Do you want the Handset to play a different ring when a specific person calls (when incoming Caller ID matches the 

Phonebook entry)? If so, use 

 or 

 to select a 

Special Ring

, and then press 

Menu/OK

 to confirm. 

You will see 

>Save

. Press 

Menu/OK

 to confirm; otherwise, press 

 to scroll to 

>Go Back

, and then press 

Menu/OK

 

to confirm. 

When finished, press and hold 

DEL/Mute

 to return to the idle screen. 

 

Storing a Pause 

When you program a name and number in the Phonebook, you can add a 3 second PAUSE in the dialing string. For 

example, if your phone system requires you to dial ‘9’ to access an outside line, you would program your numbers as 

follows: 

 

 

9  

PAUSE

  555-1212 

 

To add a pause to the dialing sequence: 
 

In the idle mode, begin entering the phone number. At the point where a Pause is required, press 

Menu/OK

Press 

 until you see 

>Pause

. Press 

Menu/OK

 again. 

You will see a 

P

 in the dialing sequence, representing the Pause. 

Continue entering the phone number, and then the name, following the instructions in 

STORING NAMES AND 

NUMBERS

.  

 

Dialing from the Phonebook 

In the idle mode, press 

 to access the Phonebook. 

Press 

 or 

 to find the desired Phonebook entry. 

With the desired entry displayed, press 

Talk

 

Deleting Phonebook Entries 

In the idle mode, press 

 to access the Phonebook. 

Press 

 or 

 to find the desired Phonebook entry. 

Press 

Menu/OK

, and then use 

 to select 

>Delete Entry

Press 

Menu/OK

 again. You will see 

Delete Entry?

 

Press 

 or 

 to select 

>Yes

 or 

>No

. Press 

Menu/OK

 to confirm. 

When finished, press 

DEL/Mute 

to return to the idle screen. 

 

14

 

Voicemail / Message Waiting 

In conjunction with voicemail service through your local telephone service provider (subscription required), your phone 

can alert you to new voicemail messages by providing an 

envelope

 icon on the display. 

NOTE:

 most, but not all 

 
 

 

Summary of Contents for 586002-TP2-27F





















Reviews: