HomeVision® Pro
© Corroventa Avfuktning AB
2021.02
29 (44)
Diagnostics
–
VentoVind™, See Sensor data
When troubleshooting VentoVind™ it may be of
help to check which sensors are connected and
working. To do this, follow the instructions
below:
In the status view, normal view, first press
<Setup>
and then <
▼
> to get to the
Service/System view.
In the Service/System view press
<Select>
to
mark the first row. Press <
▼
> to scroll down to
Diagnostics. Press
<OK>
to select this function.
Select the unit to diagnose. If only one unit is
connected, it is already marked, Press
<OK>
.
Select ”View Sensor data” by pressing
<Select>
and then <
▼
> to scroll down. Confirm the
selection with the
<OK>
button.
All connected indoor sensors are displayed on
the first screen. Scroll to the outdoor sensors
with the
<Next>
button.
