HomeVision® Pro
© Corroventa Avfuktning AB
2021.02
24 (44)
the screen presents one of the options at the bottom
right. If the connection was successful, the assigned unit
name is also presented, the letter A for crawl space
machines and the letter V for VentoVind™, followed by
the lowest available number in the series 1 to 8.
Remove the USB stick
Note: Always use this function when removing the
USB stick. The function ensures that writing to
memory is interrupted so that it can be removed
without risk of damaging the memory itself or its
files.
In status view, normal view, press
<Setup>
to get to
the Administration view where "Remove USB stick"
can be found.
Press
<Select>
which marks the first row, Date/Time.
Scroll down to ”Remove USB stick” using
<
▼
>. Press
<OK>
.
Use <
▲
> or <
▼
> to change the option from No to
Yes.
Press
<Save>
and wait until the selection is
confirmed and the screen with the text ”The USB
stick can now be safely removed” is presented.
Remove the control panel from its wall mounting,
open the battery cover by sliding it outwards and
then remove the USB stick. When the USB is
reinserted, insert it all the way into the USB port on
the control panel and verify that the indicator on the
USB stick illuminates and soon begins to flash,
indicating that writing is in progress. On the USB stick
supplied with the panel, this indicator is a small LED
which can be seen through a small hole at the top.
NOTE!
To study the log file, immediately make a copy of the
.csv file found on the USB stick and work with this
copy instead of the original. This minimises the risk
of losing, modifying or corrupting the log file. The
USB stick must be reinserted as soon as possible so
that logging can be resumed and no, or
minimal data is lost.
