CORRECT CRAFT Ski 206, Owner'S Manual, Page: 9 / 84

will lock it without entering a code. To program a primary user code, make
sure the system indicator light is off and then press the 1/2 button and the 7/8
button at the same time. This puts the system in code programming mode.
The system indicator light will be flashing. Follow the last two steps above to
complete programming the primary user code.
Key Functions
The following paragraphs describe the functions of individual keys on the
keypad. The keys will be described in order left to right. Each of the keys,
except for the “horn” key, has an indicator light on the top of the key. The
indicator light will be on if the function controlled by that key is on.
LCS or Ballast Control
The first three keys control the Launch Control System fill and drain pumps,
if the boat is equipped with a ballast tank or tanks. Various configurations can
include one single tank, two side tanks, or two side tanks and a forward
mounted tank. If the boat is equipped with a single tank the key labeled
“belly” will control the pumps for the tank. The keys for the two side tanks
are labeled “port” or “starboard” and the forward-mounted tank key is labeled
“belly.”
To turn on the fill pumps for any tank, push and quickly release the appropriate
key. This also turns on the indicator light at the top of the key. Pushing and
holding the appropriate key for a short time turns on the drain pumps and also
causes the indicator light for that key to begin flashing. Pushing and releasing
one of the keys, with either fill or drain pumps on, will turn off the pumps.
Please see the manual section covering optional LCS or ballast tanks for
complete operating instructions.
Shower
The shower is turned on or off by pressing and releasing the key. The indicator
light is on whenever the shower is on.
1.5
Function Keys
Ski Nautique 206-July29-2003.qxd 8/6/02 10:05 AM Page 1.5