manualshive.com logo in svg

CORRECT CRAFT Ski 206, Owner'S Manual, Page: 5 / 84

Share
Download
CORRECT CRAFT Ski 206 Owner'S Manual Download Page 5

Chapter 1

O

V E R V I E W

Specifications for Ski Nautique

®  

206

Length without Platform . . . . . . . . . . . 20’7.5”

(6.29 m)

Length with Platform. . . . . . . . . . . . . . 22'4"

(6.81 m)

Beam . . . . . . . . . . . . . . . . . . . . . . . . . . 91.5"

(2.32 m)

Draft . . . . . . . . . . . . . . . . . . . . . . . . . . 24"

(0.61 m)

Fuel Tank Capacity . . . . . . . . . . . . . . . 29 Gallons (110 ltr)

Max Capacity . . . . . . . . . . . . . . . . . . . 

9 people/1210 lbs (550kg)

Approx. Weight . . . . . . . . . . . . . . . . . . 2975 lbs. (1,352 kg)

Lifting Rings (dist between centers). . . 19’6.5"

(5.96 m)

Welcome to the Ski Nautique family. 

We realize you may be anxious to get your boat in
the water. This manual has been written to
familiarize and educate you about your boat so you
will be more comfortable out on the water. Your
boat is built to provide you with the finest watersports boat in the world.
Whether you are slalom skiing or riding a wakeboard, we trust you and your
family will enjoy this boat for many years.

Let’s start by taking a look at the dash pod to familiarize yourself with the
locations of the gauges and switches. 

For 2003 Correct Craft offers three

different packages of options for your Nautique.  These packages feature

equipment  or  gauges.  Based  on  your  purchase  package,  these  may  be

standard  on  your  boat.    Consult  your  dealer  for  clarification  of  the

featured package on your Nautique. 

Dash Pod and Console Layout

Standard equipment on your boat are the following gauges: oil pressure,
engine coolant temperature, speedometer, tachometer/ hour meter, fuel level,
voltage. Other equipment based on
your package may include: air/water
temp gauge, clock,
depthfinder,standard stereo remote
control or digital stereo remote
control, Correct Craft Cruise or
Perfect Pass Digital Pro speed
control.  The optional gauges can be
positioned on the console located to
the right of the drivers knee.

1.1

Ski Nautique 206 Dash Pod

Ski Nautique 206-July29-2003.qxd  8/6/02  10:05 AM  Page 1.1

Summary of Contents for Ski 206





















































































Reviews:

No comments