- 20 -
FLEX 200
5.4 Electrical connection and start-up
After turning on the computer, at system start-up, the ON lamp comes on.
When the software is launched it offers the operator a series of procedure requests, including initialization
(chapter 5.5). This operation is strictly related to the type of management software used.
2
1
4
3
b
5.5 Initialization
INITIALIZATION
is a preparatory phase that has to be carried out when the machine is turned on.
If initialization, even if required when the software is started, is not carried out, the machine gets automatically
ready for use before executing any commands.
Afterwards, the timed process of colorant stirring is started.
DANGER
At machine start-up, the initialization command might cause the turntable to be automatically moved, with the
purpose to bring the first configured circuit to a known position.
