EVOSHAKE 500 v2
-
14
-
6
INSTRUCTIONS FOR USE
6.1
General warnings
Personnel in charge of these operations must wear the following personal
protective equipment.
6.2
Control devices and connections
The socket is located behind the machine, see figure 6-18. The machine power switch is next to the fuses. This switch
cuts off power from the machine.
The EVOshake 500 v2 has control devices in front of the machine:
•
the emergency button on the top left corner, see fig. 2-1 on page 3
•
the display in the middle, see fig. 2-1 on page 3.
•
the PROG and STOP button, see fig. 6-19.
The machine has four preset shaking programs:
DANGER
Neglecting to follow safety instructions may lead to personal injury. Read the safety instructions before operating
the machine. Never operate contrary to the instructions.
Before starting up the machine, ensure that it will not cause danger.
WARNING
The shaker must only be operated by trained personnel.
Program
Function
Auto Mode
Clamping force and time are selected automatically
1 min
Shaking time: 60s Speed: 10s 270 rpm + 50s 599 rpm
2 min
Shaking time: 120s Speed: 10s 110s 595 rpm
3 min
Shaking time: 180s Speed: 10s 170s 584 rpm
Fuses
Machine
power
switch
Mains
cable
socket
Figure 6-18: The mains cable is connected to the back of
the machine.
PROG
button
STOP
button
Figure 6-19: Control devices are in the
front of the EVOshake 500 v2.
