background image

- 9 -

EVOSHAKE 500 v2

 

4

TRANSPORTATION, STORAGE AND DISPOSAL

4.1

Contents of the basic package

P l a ce d   o n   a   p a l l e t

Shaker

Equipment bag including:

Mains cable
User manual
Declaration of conformity
Spare fuses   
Supporting foot  

4.2

Handling

The EVOshake 500 v2 and its equipment have been placed on pallet for transportation, which can be handled with a 
forklift and a pump-operated cart. The package must be handled and stored upright  

The transportation and storage temperature must be between -25 and +55°C, and the relative humidity in the storage 
room from 30 to 95%. Protect the crate from rain. The 24-hour average temperature in the storage room must be below 
+70°C.

In some cases, the machine is packed into special corrosion protection plastic. This plastic can be disposed of like other 
PE plastics, taken to a dumping site or burned. We recommend recycling.

If the machine is protected by the plastic, there are corrosion protection capsules inside the machine. Capsules do not 
impede the machine's operation and they can be removed after one year (service life one year).

4.3

Product disposal and recycling 

This equipment must not be disposed of with unsorted municipal waste. Carry out a separate 
collection. 

 

Pursuant to the WEEE Directive

,

 collection, treatment

,

 recovery and environmentally sound

disposal  of Waste  Electrical  and  Electronic Equipment (WEEE) shall be carried out in compliance
with the national measures of each EU-Member State implementing the Directive

.

Differentiate the parts making up the machine based on the various materials they are made of
(plastic, iron, etc.).

For the machine components most soiled with colorant and if any products have been used on 
the machine that require special disposal procedures, follow local regulations when disposing of 
waste.

dd

If any of the above equipment (including the optional equipment mentioned in the purchase order) is 
missing, please contact your service centre.

WARNING

Damaging, tilting or mishandling the packed machine may lead to malfunction when the machine is first used.  
Special care and caution must be observed when handling the EVOshake 500 v2  and its transportation pallet.

Figure 4-6: The 

WEEE symbol

Summary of Contents for EVOSHAKE 500 V2



























Reviews: